Studio-technologies 42A 2013 Manuel d'utilisateur

Copyright © 2013 by Studio Technologies, Inc., all rights reserved www.studio-tech.com50127-1213, Issue 2User GuideIssue 2, December 2013This User Gui

Issue 2, December 2013 Model 42A User Guide Page 10 Studio Technologies, Inc. The Model 42A’s audio inputs have a nominal signal level of +4 dBu. Th

Model 42A User Guide Issue 2, December 2013 Studio Technologies, Inc. Page 11on pin 3 also has a nominal signal level of –10 dBu. Its audio source i

Issue 2, December 2013 Model 42A User Guide Page 12 Studio Technologies, Inc. twisted-pair cable rather than worrying about whether or not it is shi

Model 42A User Guide Issue 2, December 2013 Studio Technologies, Inc. Page 13when typical audio signals are present. The desired nominal output leve

Issue 2, December 2013 Model 42A User Guide Page 14 Studio Technologies, Inc. firmware. This combination adds “smarts” to otherwise fairly pedestrian

Model 42A User Guide Issue 2, December 2013 Studio Technologies, Inc. Page 15A pushbutton switch, located on the front panel, serves two purposes: s

Issue 2, December 2013 Model 42A User Guide Page 16 Studio Technologies, Inc. It’s important to note that during the 10-second off period no voltage

Model 42A User Guide Issue 2, December 2013 Studio Technologies, Inc. Page 17reduce the signal-to-noise ratio (raising the perceived noise floor) and

Issue 2, December 2013 Model 42A User Guide Page 18 Studio Technologies, Inc. one or both of the IFB output’s XLR con-nectors. Another cause can be

Model 42A User Guide Issue 2, December 2013 Studio Technologies, Inc. Page 19continue to be displayed until the button is released. Once the button

This page intentionally left blank.

Issue 2, December 2013 Model 42A User Guide Page 20 Studio Technologies, Inc. signals, to interconnect various IFB user devices. This method is undo

Model 42A User Guide Issue 2, December 2013 Studio Technologies, Inc. Page 21Figure 10. IFB output voltage-current curves for RTS 4000-Series and Mo

Issue 2, December 2013 Model 42A User Guide Page 22 Studio Technologies, Inc. SpecificationsGeneral Audio:Frequency Response – Pin 2 Output (DC with

Model 42A User Guide Issue 2, December 2013 Studio Technologies, Inc. Page 23Interfacing Riedel® Artist™ Matrix Intercom Systems with the Model 42A

Model 42A User Guide Issue 2, December 2013 Studio Technologies, Inc. Page 3Table of ContentsIntroduction ...

Issue 2, December 2013 Model 42A User Guide Page 4 Studio Technologies, Inc. This page intentionally left blank.

Model 42A User Guide Issue 2, December 2013 Studio Technologies, Inc. Page 5IntroductionThe Model 42A is designed to create broadcast-standard IFB

Issue 2, December 2013 Model 42A User Guide Page 6 Studio Technologies, Inc. 30 to 32 volts. The audio is unbalanced with a typical nominal level of

Model 42A User Guide Issue 2, December 2013 Studio Technologies, Inc. Page 7The Model 42A’s IFB outputs provide power and two channels of unbalanced

Issue 2, December 2013 Model 42A User Guide Page 8 Studio Technologies, Inc. Models 32A, 33A, and 34 listen-only belt-packs and Model 200-Series ann

Model 42A User Guide Issue 2, December 2013 Studio Technologies, Inc. Page 9Mounting the Model 42AOnce the desired mounting location has been select